black | red | white
39 - 40 - 41 - 42 - 43 - 44 - 45 - 46 - 47 - 48
LINED WITH AIR TEFLON MESH
RUBBER SOLE WITH REMOVABLE INSERT
REPLACEABLE SHIN PLATE
ZIPPER ELASTIC PANEL
TECNO CALF TENSIONER
TECNO SHIN TENSIONER
TECNO INSTEP TENSIONER
ANKLE SUPPORT BRACES WITH ANKLE JOINT
SIDE AND SLIDER AIR VENTILATION SYSTEM
SLIDER WITH ALLOY INSERT
SHOCK ABSORBING HEEL CUP
NYLON INNER SOLE WITH REMOVABLE ARCH SUPPORT
ALL PARTS OF THE BOOT CAN BE REPLACED
- FRONTALE RICAMBIABILE RACING1
- Tecno calf tensioner
- Tecno shin tensioner
- Tecno instep tensioner
- Travi sostegno caviglia - V
- Presa d’aria (str)
- INSERTO ELASTICO
- SAPONETTA CON INSERTO IN LEGA E PRESA D'ARIA
- TALLONE SHOCK ABSORBING
When constructing most of Sidi boots, Sidi uses a new generation material called “Technomicro”. Technomicro is a composite microfiber material created from strands that are so fine, each one is less than one thousand the thickness of silk. These fibers act like natural leather skin, but with the advantage of better strength, softer texture and lighter weight. Technomicro is also water resistant, highly resistant to abrasion and tearing and is easy to clean and maintain. Technomicro doesn’t stain and offers reduced weight, more flexibility and a better feel than leather or other synthetic material boots
The shin plate is made in nylon and it is inserted on a polyurethane frontal support. Both parts are replaceable.
The TECNO CALF TENSIONER mechanism adjusts the leg circumference. Placed in the back, it works through a nylon wire that hooks directly to the shin plate. The TECNO CALF TENSIONER is replaceable.
The TECNO SHIN TENSIONER mechanism helps the Tecno Calf Tensioner close the leg upper on the front part of the boot.
An additional fastening system, on the front part of the foot, on the instep. It consists of a wrap-around fascia which can be precision adjusted by the TECNO INSTEP TENSIONER mechanism.
The two nylon braces join the ankle joint with two screws that are hidden by a nylon cap. This system supports the ankle and is reinforced with fiberglass and is easy to replace. This system allows excellent flex movement front-to-back while being firm side-to-side.
On the outer lower part of the boot an air intake is fitted which can be operated by an aerodynamic shaped button.
Sidi has added a small elastic panel to aid in a smooth zipper operation as it allows a bit of movement via the elastic as the zipper passes over the rider’s ankle ball.
The toe slider is made in nylon reinforced with fiberglass. It is fitted with a new air intake and an innovative alloy insert
A polyurethane shell holds a shock absorbing insert, visible from the outside through small slits that mark out the look of the heel. The shell is mobile as it is fixed to the boot by 2 screws that allow 3 mm of impact movement.
The “CE” marking means that the product meets the basic health and safety requirements of European Directive 89/686/EEC.